[Healeys] BJ7 Rear Trim Rail.

[Magnus Karlsson]

Make sure that it fits the drainage channel during the rebuild but
don't fit it permanently. When you mount the top you start by fitting
it to the rear bow and then fold the rear edge over the rail attaching
it with clips. Then you trial fit the rail to the channel checking the
fit of the top. You have to repeat this process numerous times until
the top fits perfectly. Finally you glue the rear edge and use the clip.

Magnus Karlsson
BorC%s Motor Corporation AB

16 aug 2009 kl. 02.10 skrev J E JR AUSTIN <ahbugeye1 at bellsouth.net>:

> Ibm still in the process of learning how a Healey is built. My latest
> question isb&
> When do you mount the Rear trim rail (AHB 9556- mounts to the drainage
> channel)? Does it mount as the top is being installed or can it be
> installed
> as part of the drainage channel, when it is put into place or does it
> matter?B  Also, what is the correct color of the rail?
> Thanks in advance.
> Sam Austin
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as magnuskarlsson at bornet.net
>
> http://www.team.net/archive