[Healeys] exhaust header

[Warthodson at aol.com]

Alan,
I have suspected that the engine might be sitting higher. It is 1/2"
higher when compared it to a friend's engine that was installed  approx. 10 
years ago with new rubber. Of course, I would expect mine to  settle some 
over time.
Gary   
 
 
In a message dated 4/22/2009 12:06:45 P.M. Central Daylight Time,  
alan.bromfield at virgin.net writes:

Gary.
I'm not sure if this is the answer to the problem but it  sounds like your
engine is higher up than it should be. In my experience  the problem arises
because the large rubber engine mounts are slightly  thicker than originals
and also the two metal backing plates are bonded to  the sandwich slightly
offset to each  other.

**************Access 350+ FREE radio stations anytime from anywhere on the 
web. Get the Radio Toolbar! 
(http://toolbar.aol.com/aolradio/download.html?ncid=emlcntusdown00000003)