[Healeys] Petronics
Oudesluys
coudesluijs at chello.nl
Sun Apr 19 14:51:37 MDT 2009
Alan,
Many 12V cars (also AH's and Midgets) have been changed to 6V coil with
balast resistor for better starting. My comment was meant as a general
warning.
Lately I have seen several electronic units been fried, one Pertronics,
one Optronic and 3 or 4 Magnetronics. All had the wire to the starter
relais to short the resistor in place, which meant that during starting
the total resistance was about 1,5 Ohm instead of the 3 Ohms that is
generaly required, thus possible frying of the ignition module.
Kees Oudesluijs
Alan Seigrist schreef:
> Kees - AH ignitions, EI or stockN are unballasted. The EI made for
> the AH from Pertronix does now require a ballast resistor. Been using
> them for 20 years with no failures.
More information about the Healeys
mailing list