[Healeys] Hub bolt insert procedure - Late BN1 to BJ8

[andy pole]

Alan



People seem to be having problems with the size of these, but assuming they
are the right bolts it should be easy to just squeeze them in using a vice and
a suitable sized socket on the other side, the bolt head then squeezes against
the socket on the other side of the hub, just make sure the bolt can pass thru
the inside of the socket:



http://www.austin-healey3000.com/apps/photos/photo?photoid=5132641



It just takes a steady pressure, but souldnt be that hard.





cheers Andy


_________________________________________________________________
Share your photos with Windows Live Photos  Free.
http://clk.atdmt.com/UKM/go/134665338/direct/01/