[Healeys] Spray Gun recommendations

[Bob Spidell]

One other thing: you'll want different guns--or at least different nozzles--for shooting high-build primers as opposed to finish coats.


bs

Bob Spidell wrote:
> FWIW, my dad and I have had success with el cheapo Harbor Freight guns.
> 
> It's more technique and getting the paint mixture and gun settings right 
> than having an expensive gun.
> 
> 
> Bob
> 
> 
> 
> john spaur wrote:
>> I am looking at the DeVilBiss GFG-670 Plus gravity feed gun. It is not 
>> an HPLV spary gun.
>>
>> The literature states that "This high efficiency gravity fed gun has 
>> powerful atomization, and
>> twice the energy available than in HVLP guns! The PLUS was designed for
>> high quality production painting and it wastes less paint than standard
>> HVLPs."
>>
>> Does anyone have experience with this spray gun? Any other 
>> recommendations?
>>
>> The primary use would be to spray primer and finish parts.
>>
>> My compressor delivers 8.6 CMF at 40 PSI and 6.4 CFM at 90 PSI.
>>
>> Thank you,
>> John
> 
>>
> 
> 


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************