[Healeys] engine ground cable

[Rich C]

There is a 3/8" NF nut welded inside the inboard side wall of the right 
chassis frame approx. beside the engine to bell housing seam. The next bolt 
below the lower starter motor bolt is where the ground strap fastens to and 
grounds the engine assembly. The other end of the ground strap fastens to 
the chassis by way of a bolt running into this welded nut inside the frame.

Rich Chrysler

----- Original Message ----- 
From: "Simon & Christine Atkinson" <satkinson7314 at charter.net>
To: "'Healeys'" <healeys at autox.team.net>
Sent: Sunday, April 12, 2009 10:45 PM
Subject: [Healeys] engine ground cable


> Where does the engine ground cable attach to the chassis of a BT7?
>
> thanks
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler at quickclic.net
>
> http://www.team.net/archive