[Healeys] Syncro

[Bob Yule]

    The syncros are not interchangeable, brass for steel.  The face angles 
are different and this will be giving you exactly the condition you 
describe.  The steel syncros are used in the BJ8 box only.
Cheers.......Bob
Check out our web site www.autofarm.net
----- Original Message ----- 
From: "PG" <britishcars at shaw.ca>
To: <healeys at autox.team.net>
Sent: Thursday, April 09, 2009 1:41 AM
Subject: [Healeys] Syncro


>I just put my rebuilt transmission back into my car...during the rebuild, I
> replaced the 2nd gear syncro as it was fairly worn.   The replacement 
> syncro
> was a steel one (verus the stock brass).
>
>
>
> Everything in the transmission works fine...except the second gear
> syncro...it does not seem to be grabbing and I'm getting a lot of mashing 
> of
> gears on the downshift unless I get the revs right.
>
>
>
> I cant' think of what the issue could be..transmissions are pretty 
> straight
> forward and I'm at a loss as to why I would have this issue..I thought 
> that
> perhaps the steel syncro rings don't grab as well as the brass ones???
>
>
>
> Any input would be greatly appreciated.
>
>
>
> Paul
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as autofarm at cyg.net
>
> http://www.team.net/archive


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.11.48/2048 - Release Date: 04/08/09 
19:02:00