[Healeys] Bumper Packing pieces BJ8

[Rich C]

Hi Richard,

Actually a total of six of those little packing pieces are used on the six 
cylinder models.

There are four used on all four mounting bolts on the rear bumper. They fit 
the inner curved contour of the bumper and can be tightened without 
distorting the bumper contour.
On the front bumper only two of these curved spacers used, to fit the 
contour of the bumper where the over rider bolt will tighten. There are 
threaded brackets welded on the front bumper to take the force when 
tightening the mounting bolts on the front mounting brackets. These provide 
a flat surface for the front valance to mount by having the valance slots 
pinch firmly between the brackets and weldments.

Rich Chrysler

----- Original Message ----- 
From: "Richard Pratt" <prattri at msn.com>
To: "'Rich C'" <richchrysler at quickclic.net>
Sent: Friday, October 10, 2008 5:43 PM
Subject: Bumper Packing pieces BJ8


>
> Rich,
> Can you tell me where the four small 1" square shims (Packing) with the
> dimples go on the front and rear bumpers?
> TIA
> Richard Pratt
> 65 BJ8