[Healeys] width of rearaxle -BN1

[John Harper]

Dear Lennart

Regarding you second point. The line through the pinion shaft is not on 
the centre line of the car. It is offset by about 1/2". Don't worry 
about this, the propeller shaft can easily cope with this small 
misalignment.

Regards

>After many years of idle I'm trying to do some work on my project 100. I
>did some measurement on the rear spring anchoring points.  The width
>across the frame doesn't  match the width across the rearaxle, also the
>differential doesn't seem to be centred on the rear axle. What is the
>correct width? Shall the differential be slightly off-centre? This is a BN1.
>
>Best Regards
>Lennart Nystedt
>Sweden
>BN156102
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>Healeys at autox.team.net
>http://autox.team.net/mailman/listinfo/healeys
>
>You are subscribed as ah at jharper.demon.co.uk
>
>http://www.team.net/archive
>

-- 
John Harper