[Healeys] BJ8 Foam seats

[INSIDEDIM at aol.com]

How deep should the holes be?  
Are they all the way through?  
If not, are they drilled from the top or the bottom?
Are you talking 4 holes only?
Every 4 inches on center across the seat?
4 inches apart across the seat?
 
 
 
In a message dated 11/10/2008 10:47:28 P.M. Eastern Standard Time,  
pennell at cox.net writes:

Richard,

I did this many years ago and have very good  results.  I used a 1.5 to 2 
inch hole saw (not sure of exact size) and  drilled a 4 by 4 pattern.  Not too 
hard, not too soft - just  right!

Keith Pennell

> Hi Group,
> 
> I have new  foam seats and find they are too stiff. Anyone have any
>  recommendations as to where, how many and how deep the 1" holes should be  
to
> make the seats  softer.
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You  are subscribed as  insidedim at aol.com

http://www.team.net/archive


**************AOL Search: Your one stop for directions, recipes and all other 
Holiday needs. Search Now. 
(http://pr.atwola.com/promoclk/100000075x1212792382x1200798498/aol?redir=http://searchblog.aol.com/2008/11/04/happy-holidays-from
-aol-search/?ncid=emlcntussear00000001)