[Healeys] Labels

[Rich C]

Mike, See below......
----- Original Message ----- 
From: "Michael Gladwin" <michaelgladwin at mac.com>
To: "Healey List" <healeys at autox.team.net>
Sent: Sunday, June 22, 2008 4:17 PM
Subject: [Healeys] Labels


> Gents:
>             Could someone explain to me what the small aluminium  
> triangular label is on the top of the float chamber cover. Fitted  
> under the retaining screw.  Mine are stamped AUD 18F (front):  AUD18F  
> (middle): AUD618 (rear).  The carbs are triple H.S.4's on my BT7 MkII.

These are S.U. carb assembly part numbers.
> 
> I also note that, in the BMC manual, the forward carb float chamber  
> cover has a fuel inlet and an outlet to feed carb  #2.  However, mine  
> has a T adaptor after the rubber feed line; before the #1 carb  line  
> this then feeds carb #1 and carb #2 in parallel and not in series.   
> The T seems to me to be home-made.  Any comments?

You're right...later home done modifications.

Rich Chrysler