[Healeys] shock towers

[Tracy Drummond]

James,

Here is a photo essay of how I did it.  I did not remove the steering
column.

http://healey.org/content/view/366/168/

Tracy Drummond                  Gang Warily !
President AHCUSA              www.healey.org

-----Original Message-----
From: healeys-bounces+bighealey=charter.net at autox.team.net
[mailto:healeys-bounces+bighealey=charter.net at autox.team.net] On Behalf Of
James Shope
Sent: Saturday, June 07, 2008 9:03 PM
To: healeys
Subject: [Healeys] shock towers

checked the archives but no luck.  i am trying to determine the best way to
remove the old shock tower plate on a bj7 which is kaputt.  it is on the
driver side and i assume you have to remove the steering gear.   do you cold
chisel or grind it off.  i am also assuming the new shock plates have the
captive nuts welded in already.  we are going to have a mobile welding guy
come by to weld the new plate.  what do i need to tell him about making sure
everything is in the exact place and how critical it is, etc.,
healeymanjim
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as bighealey at charter.net

http://www.team.net/archive