[Healeys] Cam

[Chris Masucci]

Ken,

I had Elgin Cams regrind my stock BJ8 cam with a mild street grind.  I don't
have the cam card handy, but I think it was about 20 degrees duration added,
but no appreciable lift increase.  Just enough to wake it up but still give
a nice, smooth idle.  Throttle response is excellent, but I did smooth all
intake and exhaust ports to remove casting flash and matched intake and
exhaust as well.  They also reground all lifters for me and nitrided the cam
and lifters.

Cheers,
Chris
BJ8 

-----Original Message-----
From: healeys-bounces+chris.masucci=alumni.rutgers.edu at autox.team.net
[mailto:healeys-bounces+chris.masucci=alumni.rutgers.edu at autox.team.net] On
Behalf Of Ken Clifford
Sent: Sunday, January 20, 2008 6:49 PM
To: Healeys at autox.team.net
Subject: [Healeys] Cam

I am rebuilding my 1967 BJ8 and was thinking about putting in a Street Cam.
I want to spice it up a little and keep it reliable. Any suggestions?

 

Ken

 

Ken Clifford

Diversified Flooring, Inc.

Office (801)486-9888

Fax    (801)486-9889

Cell    (801)502-9390

HYPERLINK "mailto:ken at dfi1.com"ken at dfi1.com