[Healeys] BJ8 console trim
sbyers
sbyers at ec.rr.com
Fri Feb 22 18:46:31 MST 2008
Gary, I used small stainless steel screws and ground down the heads to fit
the channel.
Steve Byers
HBJ8L/36666
BJ8 Registry
Havelock, NC USA
-----Original Message-----
From: healeys-bounces+sbyers=ec.rr.com at autox.team.net
[mailto:healeys-bounces+sbyers=ec.rr.com at autox.team.net] On Behalf Of
Warthodson at aol.com
Sent: Friday, February 22, 2008 4:40 PM
To: healeys at autox.team.net
Subject: [Healeys] BJ8 console trim
I have to replace two of the "T" head screws that hold the stainless (or
chrome) trims strips that run along the sides of the BJ8 center console. The
"T"
end slides into the bottom of the trim strips & the screw portion holds the
trim against the console. I could just leave two of these off but would
prefer to replace them. Does anyone have a source for these or a suggestion
on how
you have made replacements?
Thanks,
Gary Hodson
More information about the Healeys
mailing list