[Healeys] steering box rebuild

[John Harper]

Ray

I believe you mean near the end of the BN1 run.

As you say until the change over a Burman box was supplied with a three 
hole end plate. After that is was Cam Gears with a four hole end plate.

Regards

>    Thanks for your reply.  The steering boxes I'm working on are the 
>early ones with a triangular end plate with the olive for the stator 
>tube.  It sounds like you have a later box.  The change came near the 
>end of the BN-2 run and that box was used to the mid-BN-6 run.
-- 
John Harper