[Healeys] clutch question
healey.nut at gmail.com
Sun Dec 14 19:33:05 MST 2008
Trying to move the clutch arm with your hands is very difficult. I doubt
there's any hang up. If you stood on top of the clutch housing when it was
out, you would understand why.
On Sun, Dec 14, 2008 at 10:56 PM, mailmaineguide.com
<info at atteanlodge.com>wrote:
> Can anyone tell me how much force is needed to manually disengage a clutch?
> have just mated my tranny and engine and attempted to work the clutch fork
> lever to no avail, the fork moves freely until the release bearing meets
> pressure plate but I cannot move it any further, I even tried a long pry
> until I was afraid of breaking the fork. I did not install the clutch and
> wonder if it might be defective or installed improperly. Many thanks.
> Brad Holden
> 67 BJ8
More information about the Healeys