[Healeys] Intake Nuts

[Alan Bromfield]

Team.
 Jetnuts are a nice bit of kit and a recommended application would be to use
them on the lower four studs that hold the carbs to the inlet manifold. They
allow a smaller spanner or even a socket to be used underneath those HD8's.
It make s a big difference, especially for you LHD guys where the steering
column adds to the problems.

First recommended on this list a couple of years ago.

I wouldn't use them, or any steel nut, anywhere on the exhaust side -
guaranteed to weld themselves solid.
 _______________________________________________
(______________  Alan Bromfield  _______________)
   (______     \__1957-BN4 x 2__/    _______)
          (______www.nfahc.co.uk____)

-----Original Message-----
From: healeys-bounces+alan.bromfield=virgin.net at autox.team.net
[mailto:healeys-bounces+alan.bromfield=virgin.net at autox.team.net] On Behalf
Of Bob Spidell
Sent: Sunday, August 24, 2008 11:35 PM
Cc: Healey List
Subject: Re: [Healeys] Intake Nuts

Anybody tried these on the exhaust manifold to downpipe flange studs?


bs

John Sims wrote: