[Healeys] Fwd: Tricarb Choke Cables

[David Schweninger]

Here you go. If  the pictures don't work. let me know and I'll try  
something else.

  Dave and Daisy

Begin forwarded message:

> From: David Schweninger <quenty at ntelos.net>
> Date: July 30, 2008 5:21:16 PM EDT
> To: Al Fuller <al at bighealey.org>, Healey Mail List <healeys at autox.team.net 
> >
> Cc: David Schweninger <quenty at ntelos.net>
> Subject: Tricarb Choke Cables
>
> Al,
> These pictures show the choke cable setup on my BN7. The main cable  
> from the dash is a standard repro.
>  I made the cables to the carbs.
>  They are all standard motorcycle throttle parts. This consists of   
> the Black Sleeving, the End Caps for the sleeving, the 1/16"  
> stranded (7X19) Cable, and the Ferrel which is soldered on to the  
> upper end of the cable.
> An older motorcycle shop will have all the parts. The newer shops  
> tend to be like Kmart ,with complete assemblies in little plastic  
> bags.
>
> Good luck
>
> Dave and Daisy
>
>
>
>
>
>
>
>
> This shows the sleeving pulled back. Note the end cap. Also the  
> ferrel is just visible on the brass barrel.
>
>
>
> This shows the Ferrel which has a small cup on the large end. the  
> cable is pushed through and the cable is splayed open a bit, then  
> pulled back in to the cup and soldered.