[Healeys] Spring bar to bumper packing pieces

[Richard Collins]

If it is what I surmise you are describing, I used only one bolt per side as
the curved bar and the bumper weren't even close to fitting 2 bolts.  I
suspect the aftermarket pieces I bought were so poorly spec'd and constructed
that even after taslking to0 the un-named vendor, they could not be drilled in
any way to take both bolts.  But, since it was not visually pathetic for a
"driver", the pieces are on the car and work in that condition.

Richard of KY/CA
1960 BN7 #440> Date: Mon, 21 Apr 2008 08:34:03 -0400> From:
dwhite4949 at wowway.com> To: healeys at autox.team.net> Subject: [Healeys] Spring
bar to bumper packing pieces> > I've searched the archives and can't find an
answer to this and the > exploded parts view isn't helping me. Regarding the
small square > (curved) metal pieces that go between the "spring bar" and the
inside of > the bumpers- assuming that the spring bars aren't bent out of
shape, do > I use one per each of the attaching bolts?> Thanks,> Dan White>
1962 BN7> _______________________________________________> Support Team.Net
http://www.team.net/donate.html> > Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys> > You are subscribed as
gonnagitcha90 at hotmail.com> > http://www.team.net/archive
_________________________________________________________________
Use video conversation to talk face-to-face with Windows Live Messenger.
http://www.windowslive.com/messenger/connect_your_way.html?ocid=TXT_TAGLM_WL_
Refresh_messenger_video_042008