[Healeys] wiper blades

[Alan Seigrist]

Gary -

Depending on the blades sometimes it helps to bend the arm curvature a
bit to make them work

Alan



On 4/21/08, Warthodson at aol.com <Warthodson at aol.com> wrote:
> Can someone recommend a source for good quality wiper blades for a BJ8?  The
> originals were Approx. 9" long (the rubber blade part). I bought a set  from
> Victoria British that are 10" long. The length is O.K., but they are
> incredibly stiff & will not conform to the curvature of the windshield. I
> checked the
> archives & found a lot of discussion about using RainX but  nothing about
> wiper blade sources.
> Thanks,
> Gary Hodson
>
>
>
> **************Need a new ride? Check out the largest site for U.S. used car
> listings at AOL Autos.
> (http://autos.aol.com/used?NCID=aolcmp00300000002851)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut at gmail.com
>
> http://www.team.net/archive
>


-- 
Alan

'52 A90
'53 BN1
'64 BJ8