[Healeys] Healey Camber Alignment

Rob bj7healey at gto.net
Mon Apr 14 10:34:18 MDT 2008


Hi Everyone
        I have just replaced a king pin and want to check the camber 
alignment. In the manual it says
      aprox 1 deg out at top and the car must be unladen to check. Does this 
mean the car is up on Jacks or can I     just raise the wheel under the 
wishbone on each wheel.

                              Bob Slater
                                 1963 BJ7
----- Original Message ----- 
From: <bighealey at charter.net>
To: "Michael Gladwin" <michaelgladwin at mac.com>; "Healey List" 
<healeys at autox.team.net>
Sent: Friday, April 04, 2008 1:40 PM
Subject: Re: [Healeys] Filters


> Michael,
>
> Consider a spin on adapter and use K&N HP-2009 oil filters.
>
> You'll be happy and these filters have the flo-back device improving over 
> the original design.
>
> Cheers!
> It's off to the races at Sear's Point for the weekend 
> wheeeeeeeeeeeee!!!!!!!
>
> Tracy
>
>
> ---- Michael Gladwin <michaelgladwin at mac.com> wrote:
>> Gents:
>>             I there a cross-over, modern, commercial filter insert for
>> the original design on a BT7?  Could not find this in the archives.
>> Thanks
>> Mike
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> You are subscribed as bighealey at charter.net
>>
>> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as bj7healey at gto.net
>
> http://www.team.net/archive
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.519 / Virus Database: 269.22.5/1359 - Release Date: 4/4/2008 
> 8:23 AM


More information about the Healeys mailing list