[Healeys] door shut face finisher fasteners

Rich C richchrysler at quickclic.net
Sat Apr 12 22:34:42 MDT 2008


Dave,

The screws for your BN7 alloy trim plates were not Posi-drive until the BJ8. 
The BN7 would have Phillips heads with the slight ringed flange around the 
edge of the head. Shank was small, probably a number 4 self tapping, and 
they were not countersunk but set onto the surface of the trim plates.

Meanwhile the Hundreds used Number 6 self tapping countersunk screws with 
slightly domed heads. These are carefully countersunk into the surface of 
the alloy plates.

Rich Chrysler

----- Original Message ----- 
From: "David Malaney" <61healeybn7 at gmail.com>
To: <healeys at autox.team.net>
Sent: Saturday, April 12, 2008 1:23 PM
Subject: [Healeys] door shut face finisher fasteners


> Can someone remind me what fasteners are used on the door finish pieces.
>
>
> Thanks,
> Bill
> BN7
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler at quickclic.net
>
> http://www.team.net/archive 


More information about the Healeys mailing list