[Healeys] BT7 Trunk/Boot

[Brashear, Jack, N]

Bill, find a straight used one if you can.  Aftermarket repros of most
body parts will almost surely not fit...at least that has been my
experience.  Even a good used one may be difficult to fit if your car
has been crunched.
Jack

-----Original Message-----
From: healeys-bounces+jnbrashear=garverengineers.com at autox.team.net
[mailto:healeys-bounces+jnbrashear=garverengineers.com at autox.team.net]
On Behalf Of Wilkmanracing at aol.com
Sent: Wednesday, October 10, 2007 4:13 PM
To: healeys at autox.team.net
Subject: [Healeys] BT7 Trunk/Boot

I'm in the process of stripping my BT7 down for body work corrections
and a
fresh paint job.  The trunk had about a ton and a half of Bondo on it,
hiding
a previous shunt.  I'm considering buying a new trunk lid rather  than
trying
to work with what I have.  Moss has a repro lid for about a  grand,
which
seems a little pricey.  Does anyone know of a good source for  this
part?  I'd
consider a good used part if any listers know where one can  be found.
My main
concern is to obtain a trunk lid that fits.

Thanks.

Bill Wilkman