[Healeys] bellhousing/transmission/overdrive
Warthodson at aol.com
Warthodson at aol.com
Sat Oct 6 07:06:36 MDT 2007
I didn't get any response the my first inquiry so I thought I would try a
gain. Surely someone knows how to determine the proper thickness of the shim pack.
There is a "spring plate-bearing" & shim(s) that go between the bellhousing &
transmission. The purpose is assure there is pressure on the input bearing
outer race so that does not rotate in the transmission casing. There is a
similar setup at the rear of the transmission & overdrive. Assuming you have a
bellhousing, transmission & overdrive that were not original mated together & the
original shim pack is not available, what is the procedure for determining the
correct thickness of the spring washer & shim(s) necessary. Is this procedure
in any of the shop manuals or other Tech. resources?
Gary Hodson
************************************** See what's new at http://www.aol.com
More information about the Healeys
mailing list