[Healeys] Engine Install

[rrengineer at dslextreme.com]

That's just about what I thought, but what about the transmission? 
Attached or put the tranny in first, then the engine?
Mike
And by the way Bill, I'm originally from Attleboro, not too far from you. 
I live in San Bernardino, CA now.


legal_bill at verizon.net
> Oil pan, block with water pump installed and cylinder head.  I leave the
> valve cover off.  I bolt on all other stuff after.  Some do the water pump
> after also.  I want as few items on as possible as I swing the engine in.
> With the shroud off the car, it will be very easy to bolt on everything
> else.
>
> From: rrengineer at dslextreme.com
> Date: 2007/11/16 Fri PM 10:24:47 CST
> To: healeys at autox.team.net
> Subject: [Healeys] Engine Install
>
> I am getting close to getting my BN2 body back from the painter.  I was
> wondering what do you install on the engine and what is best installed
> after it is in such as generator, exhaust, etc.  Oh yes, the front shroud
> will be off the car of course.
>
> Mike MacLean
> 56 BN2
> 60 AN5
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
>
> Bill
> Boston area
> '65 BJ8
> '02 S2000
> '06 330i