[Healeys] Healey 100 fuel line question

Carr&Edwards scvc70 at epix.net
Thu Jul 26 08:00:26 MDT 2007


Josef --

As the fuel system bits of my car are hanging on the wall, measurement was 
simple!  From the bottom of the stub on the banjo bolt (where it is soldered 
to the down-pipe) to the tip of the flare on the end of the pipe is 14".

Sarah Carr
BN1 in Pennsylvania




----- Original Message ----- 
From: <Josef.Eckert at t-systems.com>
To: <Healeys at autox.team.net>
Sent: Thursday, July 26, 2007 4:27 AM
Subject: [Healeys] Healey 100 fuel line question


>I have a question to the Healey 100 experts.
> I need the correct length of the copper fuel line which runs down from
> the front carb junction to the flexible line at the front bottom of the
> engine. The original line on my car was cut to 6 inches, but I expect it
> should be longer to say about 10 inches.
> In the original Workshop Manual page D18, fig 21 you can see the line
> going down in front of the l/h engine mount and ends between the upper
> and lower engine mount frame fixing bolt. Is this the correct length, or
> is this picture in the Workshop Manual not correct?
> So I need the correct length of the line.
> Many thanks for any reply.
>
> Josef Eckert
> Konigswinter/Germany
> 54BN1, 62BT7, 65Sprite 


More information about the Healeys mailing list