[Healeys] BJ8 transmission

[wericars at aol.com]

Not that I recall, but I can tell you that during the rebuild of my BJ8 I have found a great many errors in the parts book.? If I ever have my car judged for concourse, I will probably get very uspset when the points are deducted for assembly? that followed the parts book.


Bill
Boston area
65 BJ8


-----Original Message-----
From: Warthodson at aol.com
To: healeys at autox.team.net
Sent: Wed, 18 Jul 2007 8:17 pm
Subject: [Healeys] BJ8 transmission



I just disassembled two BJ8 mainshaft assemblies. In both cases, 2nd gear & 
third gear each contained 33 needle bearings. The parts book indicates 2nd gear 
should have 33 needle bearings (P/N AEC3180) & 3rd gear should have 32 needle 
bearings (P/N AEC3180). The bearing surface on the main shaft is the same 
diameter at both gear locations, so it appears evident that the parts book is in 

error. Has this been discussed before? 
Gary Hodson 



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
wericars at aol.com 

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys


________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free from AOL at AOL.com.