[Healeys] Pertronix

[John Sims]

Forgot to add that my car is positive ground and even though a BN6 the dizzy
is the same as a BJ8

John Sims, BN6
Aberdeen, NJ
 
www.healey6.com
 


-----Original Message-----
From: healeys-bounces+ahbn6=optonline.net at autox.team.net
[mailto:healeys-bounces+ahbn6=optonline.net at autox.team.net] On Behalf Of R.
Price Lindsay
Sent: Thursday, July 12, 2007 9:35 AM
To: Healey List
Subject: [Healeys] Pertronix

List -



After much resistance, I broke down and bought a Pertronix system for my
positive ground BJ8.  I installed the system last evening but was
confused about where to attach the wire that is to go to the "ignition
switch wire".  (One wire goes to the negative side of the coil which is
properly in place.)  There is a connection point on top of the starter
solenoid that I tried but nothing.  I tried the positive side of the
coil, nothing.  One unique situation I came across when installing the
new Flame Thrower coil - the bracket attaching it to the generator was
too large so as a temporary fix, I used some rubber to wrap the coil so
that it would fit snug.  Is there a grounding connectivity between the
coil body and the generator bracket?  HELP!



Price Lindsay

BJ8
_______________________________________________
ahbn6 at optonline.net

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys