[Healeys] Brake Reservoir Lettering - STOP
edmyed at harbornet.com
Sun Dec 30 12:46:06 MST 2007
Hello Charlie Frazer, Ed at Just Brits and all others wanting Brake Reservoir
Lettering - My supply is exhausted - Ed wants 10 and Charlie Frazer sent $ for
5 but I only have 10 left - I will sent 4 to Ed and 4 to Charlie + left over
$. If I receive email requests for 50 more, I will have more printed - Stop
sending SASEs with $. I'll keep you posted. Thanks for the overwhelming
response - I would have ordered 500 originially if I had know there was such a
demand, since once it is set up the printing cost is negligible.
----- Original Message -----
From: "Charlie Frazer" <cfrazer at jcomm.uoregon.edu>
To: "Richard Bittmann" <edmyed at harbornet.com>
Sent: Saturday, December 29, 2007 6:53 PM
Subject: Re: [Healeys] Brake Reservoir Lettering
> Thank you very much for sharing the fruit of your efforts.
> On Friday I mailed you $5 for some decals but later regretted not
> including other contact information in case it was necessary. You
> should receive my letter early in the week, but additional contact info
> appears below, if necessary.
> Again, thank you for sharing your resource.
> Charlie Frazer
> cfrazer at uoregon.edu
> 541 345-1694
> Eugene, OR 97403
> On Dec 20, 2007, at 5:28 PM, Richard Bittmann wrote:
> Gary and the list,
> I had 100ea "CLUTCH BRAKE" decals made which are
> adhesive and concourse correct at a company called Lazer Trends in
> WA. I have 42 left of which I'll save 12 for "gifts". That leaves 30
> for whoever wants them for $1 ea. Just drop $1 bill and a self
> envelope into an envelope addressed to:
> Richard Bittmann
> 3320 North 35th Street
> Tacoma, WA 98407
> and I will mail it back to you. I hope I don't get more than 30 (or
> replys. Happy Holidays
> Richard Bittmann
> BJ7 Tacoma
> ps I hope this isn't a social faux pax and banned by the list. If so,
> please ignore.
> ----- Original Message -----
> From: <Editorgary at aol.com>
> To: <healeys at autox.team.net>
> Sent: Thursday, December 20, 2007 2:02 PM
> Subject: [Healeys] Brake Reservoir Lettering
>> Painting the brake reservoir lettering with a stencil is far too
>> Slightly easier is to get a set of rub-on letters in the proper sized
>> helvetica" in white from any good art supply store, cut out the ones
>> and position them on scotch-tape, then rub them onto the can.
>> A few years ago someone had made up some rub-on sets that had the right
>> words, but I don't remember who that was or if they're still available.
More information about the Healeys