[Healeys] Sealing WW spoke heads

tomfelts at windstream.net tomfelts at windstream.net
Fri Dec 7 07:06:27 MST 2007


I use a light coating of anti-seize grease on the hubs and haven't noticed any leaking through.  I'd never use regular grease.

> 
> From: Charlie Frazer <cfrazer at jcomm.uoregon.edu>
> Date: 2007/12/07 Fri AM 12:40:21 CST
> To: healeys at autox.team.net
> Subject: [Healeys] Sealing WW spoke heads
> 
> Im restoring a set of Dunlop wire wheels.
> Im to the point where the painting is complete and Ive been told its
> important to seal the spoke heads on the inside of the hub to prevent
> grease from the splines being thrown out of the hub and down the
> spokes.
> Ive used clear silicone to seal the spoke heads inside the outboard
> neck of the hub.  Is it important to seal the heads on the back (wide
> side) of the hub as well?
> Thanks for your help.
> Charlie
> cfrazer at uoregon.edu
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys


More information about the Healeys mailing list