[Healeys] Clutch master

[Rich C]

Keith,

This sounds like the corect assembly 625 indicates the correct bore of 5/8" 
for the clutch.. The reservoir for the clutch however is the small tube in 
the middle of the reservoir. The outer (more capacity) should be for the 
brakes.

Rich Chrysler

----- Original Message ----- 
From: <pennell at cox.net>
To: <healeys at autox.team.net>
Sent: Thursday, August 02, 2007 8:09 PM
Subject: [Healeys] Clutch master


> Listers!
>
> I need help.  Appears as though I need to replace/repair my clutch master 
> cylinder.  Its fork shaft has some wetness and there is discoloration on 
> the carpet beneath it.  Also the outside of the reservoir is low (That is 
> the clutch side right?)
>
> In my stuff I found what looks to be a NIB assembly.  It even still has 
> the two plastic plugs.  Bore is perfect.  The numbers on it are
> Girling 625
> 310360
> D12
> BS
>
> Is this the right assembly for my 60 BN7????
>
> TIA
> Keith Pennell
> _______________________________________________
> richchrysler at quickclic.net
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys