[Fot] TR6 Steering quick rack replacement source?

[DAVE HOGYE]

I very recently went through an exhaustive process of replacing a rack on a TR3.  I communicated with Moss and others in order to just replace the rack.  I did not want a complete conversion kit.  
The conversion kit in the car was a pre-2010 product installed by Racetorations.  The new kits are completely different.  
I found that Bastuck in Germany sells a kit that is exactly like the original, pre-2010 kit, with heavy steel brackets on each side instead of a one piece light gauge steel bracket in the new kit.  
The Bastuck rack is a nice part and perfectly fit the old mounting brackets.  I discovered that their u-joints and steering shaft were also needed for a direct bolt-in, because the size of the pinion housing is larger, so a shorter u-joint and shaft assembly was needed.  
 
Dave H.

> On 11/24/2025 8:37 AM PST Mark Cook via Fot <fot at autox.team.net> wrote:
>  
>  
> 
> Looking to replace one of my TR6 race car steering racks which is wearing out.  Other than a 2.5 quick rack, any particular recommendations, where to purchase?
> 
>  
> 
> Thanks,
> 
>  
> 
> Mark Cook
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/dlhogye@comcast.net
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20251124/280ed580/attachment.htm>