[Fot] TR6 race car re-build - Fuel line questions

[Mark Cook]

All,

 

So, I have gutted and stripped the #55 '69 TR6 race car first purchased,
having a proper roll cage installed and painted, and will be installing a
newly built engine with triple Weber 45 DCOEs.  Will be ordering some parts
while cage is installed and body painted.

 

Brings me to my questions.   What size fuel lines - 5/16" (-5) or 3/8" (-6)?
Also, thoughts on 100% steel braided PTFE, or combination of metal fuel line
(front to back) with braided to connect to the fuel cell and Webers?  Fuel
pump, filter and pressure regulator will be in the trunk with the fuel cell.
Return line?  The 6 previously had fuel injection and a fuel return line.
Not sure it is necessary for the Webers.

 

Thanks!

 

Mark Cook

 

During Chuck Arnold's ownership (pre-2018)                             Prior
Owner 2018-2023
Now (coffee table stage)


         

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20250611/0d6aa7a2/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 141305 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20250611/0d6aa7a2/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 19698 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20250611/0d6aa7a2/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.jpg
Type: image/jpeg
Size: 13376 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20250611/0d6aa7a2/attachment-0001.jpg>