[Fot] Revolution lug nut needed 1/2-20

[David Gott]

Thanks Mike!  Unfortunately the Cragar style is for an 11/16 hole versus my 3/4”.   I’ve found one that is 1” long as my best bet so far…


Sent from Yahoo Mail for iPhone


On Tuesday, June 10, 2025, 8:56 PM, Mike Harmuth <ofracer at gmail.com> wrote:

Dave, I read that Cragar rims use the same lugs. if so, Dorman makes one.The specs look right.Dorman # 611-157.1

https://www.ebay.com/itm/134876641144
On Tue, Jun 10, 2025 at 6:41 PM David Gott via Fot <fot at autox.team.net> wrote:

Hi FOT,
One of my lug nuts had a disagreement on threading on the same path I intended.   Revolution hasn’t sourced these in 30 years when I asked them 5years ago.  This is a 1/20-20 thread, with a shank .74” in diameter, 2.5” deep.  I’ve found some new ones 1” deep, but would prefer to get a similar length as designed.  Anyone happen to have one kicking around, by chance? I cannot find a source.
Thanks! Dave Gott#80 TR4





Sent from Yahoo Mail for iPad
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/ofracer@gmail.com






-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20250611/2bc1acca/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: F17A6FAB-C8B9-4F06-99B8-C74624723E59.jpeg
Type: image/jpeg
Size: 3387426 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20250611/2bc1acca/attachment-0001.jpeg>