[Fot] Toyota Front Calipers
Michael Deweerd
michaelndeweerd at gmail.com
Tue Sep 24 11:10:03 MDT 2024
Thank You everyone for your insight and input, this was a campfire
discussion last weekend with different thoughts on what the outcomes would
be if a larger master cylinder were to be used and we all agree
So now the question is
My brake fluid lowers considerably after a race session by 1/4 inch using
the Wilwood one piece 5/8 master. Pad wear is obvious I run stock pads and
brake late so ….
Is there a larger reserve Master cylinder that will fit where the stock
sized Wilwood is or am I stuck going to a remote reservoir ?
Thanks in advance
*Mike Deweerd*
On Mon, Sep 23, 2024 at 8:27 PM Michael Deweerd <michaelndeweerd at gmail.com>
wrote:
>
> Amici,
> Is Anyone running the Toyota front calipers? What size master cylinder
> should I use with them?
> I'm currently set up with a 5/8 front and 5/8 rear set up with a balance
> bar to adjust the bias.
> Should I use a 3/4 on the fronts?
> Thanks in advance.
> --
> *Mike Deweerd TR4*
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20240924/c847b571/attachment.htm>
More information about the Fot
mailing list