[Fot] rod bearing clearances

[yellow04]

This is what I use as well, .002 to .0025. It works.  

Henry Frye
2025 Kastner Cup Chair
fot at kastnercup.com 

On 2024-11-27 17:03, Steve Yott via Fot wrote:

> .002" -0 + .0005 
> 
> -------- Original message -------- 
> From: Lorne Fritz via Fot <fot at autox.team.net> 
> Date: 11/27/24 3:45 PM (GMT-06:00) 
> To: fot at autox.team.net 
> Subject: [Fot] rod bearing clearances 
> 
> Hi.  What is everyone using for rod bearing clearances on the TR3/4 engines.  The competition manual says .001 extra.  The workshop manual specs. says 2.0861 to 2.0866. with a  wear limit clearnce of   .005.   That would me to  that 2.0801(2.0861 -.005,-.001 0) would be acceptable.  What does the group think?  Thanks in advance.   Lorne Fritz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20241128/4fceaac6/attachment.htm>