[Fot] Piston to head clearance

[Lorne Fritz]

Thanks everyone for the info.  In the past after kissing the head I cut
.010 off the pistons while using a thin steel head gasket.  Right now I
have .025. I didn't think that was enough, that is why I was looking for
help.       Lorne

On Thu, Jan 11, 2024 at 2:29 PM <tr4racing at googlemail.com> wrote:

> Hi,
>
>
>
> I’ve found a gentle gain in power with gap of 0.047”. Less distance did
> cost 4-5 Hp.
>
>
>
> Cheers
>
> Chris
>
>
>
>
>
> *From:* Fot <fot-bounces at autox.team.net> *On Behalf Of *Lorne Fritz via
> Fot
> *Sent:* Thursday, January 11, 2024 6:06 PM
> *To:* fot at autox.team.net
> *Subject:* [Fot] Piston to head clearance
>
>
>
> Hi.  In the past I have had pistons hit the head and leave a mark(TR3/4).
> What piston to head clearance are most of you running? Thanks in advance,
> Lorne
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20240111/95b642f3/attachment.htm>