[Fot] TR rear brakes

[JS Performance Motoring, LLC]

Greg,
        I've not found one brand better than the others, but after
experiencing a similar failure, I now 100% inspect new cylinders before
installing.  I pull the piston out, and clean any chips or machining crud
before installing for use, plus check the condition of the seal.



Jason Sukey
JS Performance Motoring, LLC
440.984.7720
jason at jsperformancemotoring.com
https://www.facebook.com/JSPerformanceMotoring/


On Sun, Aug 25, 2024 at 11:34 AM Greg Blake via Fot <fot at autox.team.net>
wrote:

> Looking over car I seem to have a weeping rear brake cylinder. It lasted 3
> race weekends. It’s a 0.75 AP brand from BPNW. The other one held just
> fine. Is anyone having good luck with wheel cylinders these days? What
> brand/source are you using?
>
> Previously was have terrible time with rear brakes, but that was a sticky
> brake pedal that was causing drag and would fry the rears in one session.
> I’ve sorted that now.
>
> Appreciate thoughts.
>
> Greg
>
>
> Sent from my iPhone
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/jason@jsperformancemotoring.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20240825/a01371af/attachment.htm>