[Fot] Slave cylinder/master cylinder
tr4racing at googlemail.com
tr4racing at googlemail.com
Sat May 27 10:38:55 MDT 2023
I do have this phenomenon on my TR4 as well.
My best guess is thermal expansion of aluminum bellhousing, while the pushrod remains cold in the air under the car.
My solution:
Setting the pushrod tight enough to have no binding.
Cheers
Chris
From: Fot <fot-bounces at autox.team.net> On Behalf Of McKearn McKearn via Fot
Sent: Saturday, May 27, 2023 5:01 PM
To: FOT list <fot at autox.team.net>
Subject: [Fot] Slave cylinder/master cylinder
Hi all.
Got the GT6 out a few days ago and remembered that I was going to fix the clutch problem I had last fall before I stored it away but did'nt ..
So long story short, I don't know if it's the slave cyl or master cylinder but it works fine at first few shifts but as you drive it you get less and less clutch movement.
Seems like if you let it set a while it will work again..
Any ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230527/b80df322/attachment.htm>
More information about the Fot
mailing list