[Fot] Rod and Main Bearings

[fubog1]

 Old NOS Vandervell or REPCO, if you can find them, but they've pretty much dried up.Unless your rods are drilled for an oil squirter ie stock, the 4.2 Jaguar bearings fit the big-end & are somewhat available, plus you get 1 1/2 engines worth in a set.
The Kings seem OK but the thickness on some that I've checked have been a few 10ths off spec, so clearances may have to be adjusted.Also consider having them coated, I've used Polymer Dynamics in Texas for decades.HTH
Glen
 
 
-----Original Message-----
From: Bryan Brazelton via Fot <fot at autox.team.net>
To: FoTTriumph <fot at autox.team.net>
Sent: Fri, May 19, 2023 11:50 am
Subject: [Fot] Rod and Main Bearings

Good Morning group, I'm looking to freshen up the TR 3 race car before we head up to the Kastner Cup  and was wondering what the best brand of Rod and Main Bearings there are out there?  
Thank You all in advance

-- 
Bryan B.
901-277-7415Purple People Eater (59 TR 3 Racer)Jack Wheelers #11 TR 4ASlagles TR 8 Coupe_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230519/b7c07c7d/attachment.htm>