[Fot] New engine priming on TR4

[Tony Drews]

Run in reverse, yes.  You should see some oil come up to the rockers.  
You should see oil pressure on the oil pressure gauge. I can get up to 
over 30 psi with the drill.

- Tony

On 5/2/2023 4:05 PM, Michael Moore via Fot wrote:
>
> I am priming my rebuilt engine before starting, I have a drill 
> connected to a spare distributor shaft which is in the oil pump 
> groove, I run it in reverse, correct?
>
> I don’t see any oil coming up to rocker shaft, should I be?
>
> How can I tell if it is working?
>
> Using Brad Penn 30wht break in oil.
>
> Thanks
>
> Mike
>
> Michael T. Moore, CPA
>
> 3255 West 26^th Street
>
> Erie, PA 16506
>
> Phone: 814-616-8652  ext 100
>
> Fax: 888-865-5279
>
> Email: mmoore at mtmcpafirm.com <mailto:mmoore at mtmcpafirm.com>
>
> This electronic mail message contains confidential and legally 
> privileged information intended only for the use of the recipient. If 
> the reader of this message is not the intended recipient, the reader 
> is hereby notified that any dissemination, distribution, copying or 
> other use of this message is strictly prohibited and is hereby 
> instructed to notify the sender immediately by return email and 
> destroy this copy of this message.
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate:http://www.team.net/donate.html
> Archive:http://autox.team.net/archive  http://www.team.net/pipermail/fot
> Unsubscribe/Manage:http://autox.team.net/mailman/options/fot/tony@tonydrews.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230502/7e549515/attachment.htm>