[Fot] Rear Main Cap

[Rick Parent]

Never, ever change caps without align honing, you can swap bearing though.
Rick Parent
"Doing the right thing is always the right thing, regardless of consequences"
 

    On Saturday, March 18, 2023 at 06:21:25 AM MST, Rod Pierce via Fot <fot at autox.team.net> wrote:  
 
 The image shows the rear main cap and bearing on a small journal 1300.
As you can see, there is an offset between the two bearing halves. 
I was attempting to mix and match parts from my parts bin.
I'm curious about the source of the offset.  Is there a difference in end caps from year to year on the 1300 or is there a difference from engine to engine when they were manufactured?_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rick.parent@att.net


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230318/fb447259/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20230318_081635.jpg
Type: image/jpeg
Size: 612123 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20230318/fb447259/attachment.jpg>