[Fot] TR4 oil pump drive shaft dimensions?

[vfracing at aol.com]

I have several used ones in various sages of conditioning you are interested in taking that path.  A spare shaft is also handy for priming the engine after a build or after sitting a long time.  just chuck it into a 1/2 drill and run it backwards.
Phil Gott508 414 0256

-----Original Message-----
From: John H. Hasty via Fot <fot at autox.team.net>
To: J.C. Hassall <jhassall at gmail.com>
Cc: Friends of Triumph <fot at autox.team.net>
Sent: Mon, Sep 12, 2022 3:34 pm
Subject: Re: [Fot] TR4 oil pump drive shaft dimensions?

I’m sure Steve Yott will make you one much better than stock…

Sent from my iPhone

On Sep 12, 2022, at 1:23 PM, J.C. Hassall via Fot <fot at autox.team.net> wrote:



Amici,
I loaned my spare shaft to a friend years ago; he and the shaft have gone missing.  I'd buy another Moss # 836-510 but at $100 I'm too frugal (my daughter says "cheap").  Could someone pls post the dimensions of the shaft?  I'll fabricate my own.  Or does anyone have a spare they're willing to sell? 
TIA-- 
jim  W4BEA

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty@mhc-law.com



_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220912/f5bb059f/attachment.htm>