[Fot] Factory set up tools for a “big TR” (TR4A and TR6) diffrtential

[JOSEPH ALEXANDER]

The Coventry Foundation is collecting factory tools, mainly Jaguar so far.

They are setting up a loan program.  The MGs and Triumphs will likely be included.

You may wish to research the Coventry Foundation.

Joe Alexander
4505 Donald Dr
Cedar Falls, IA 50613
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711




Joe Alexander
4505 Donald Dr
Cedar Falls, IA 50613
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711

> On Nov 16, 2022, at 8:44 PM, Philip Gott via Fot <fot at autox.team.net> wrote:
> 
> Amici;
> A while back was there a post about developing a “lending library” of Factory Triumph special tools? I am looking to borrow (or buy as a last resort) the tools necessary to properly set up a new ring and pinion in the rear end. Does anyone have a set and if so may we borrow them? Two of us here in Massachusetts have diffs in need of proper set up.
> Short of that, who is the best person to set up these properly. 
> Regards and Happy Thanksgiving to all!
> Phil Gott
> 65 TR4A #114.
> 
> Sent from my iPhone
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/joealexandervintage@gmail.com