[Fot] Street TR4 gearbox

[Glenn Franco]

I have rebuilt a boat load of these and it's not the oil. If you put all
the parts and pieces back together in the right location it is likely the
adjustment of the lever and the solenoid. Check out the adjustment and vary
the gap between the parts and see if you get engagement.
good luck.
The overdrive is not that complicated so look closely to what you have
assembled.
Glenn

On Tue, May 31, 2022 at 4:48 PM Gary Schneider via Fot <fot at autox.team.net>
wrote:

> It wasn't Gone in 60 Seconds, but it only took 15 minutes. [image: Emoji]
> Glad to have it go to a good home!
> Gary
>
> On Tuesday, May 31, 2022 at 02:22:10 PM CDT, Gary Schneider <
> garygret at sbcglobal.net> wrote:
>
>
> If anyone needs it, I have an OD pressure gauge I'd be happy to donate to
> the cause. First response with shipping address is welcome to it.
> Gary Schneider
>
> On Tuesday, May 31, 2022 at 01:50:15 PM CDT, fubog1 via Fot <
> fot at autox.team.net> wrote:
>
>
> If the solenoid is set correctly & the mechanical linkage (lever & shaft)
> working, I would be doing a pressure check next...
>
> Glen Efinger
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage <http://www.team.net/pipermail/fotUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/fot/gaf3@charter.net
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220531/6e941e31/attachment.htm>