[Fot] Vitesse, Herald, Spitfire and GT6 front hubs

[Don Couch]

They still need grease. They just have a seal on outside of each so no felt seal/grease cap needed. 
The alloy hubs will take either style bearing. 

I do see what you are saying about heat. I’m not running them right now but was planning to. Hmmmmmmm
Don

Sent from my iPhone

> On Jan 17, 2022, at 2:37 PM, Scott Janzen <sjanzen at me.com> wrote:
> 
> Thanks. Not sure how i feel about running sealed bearings in a race car. Anyone have experience? With front brake heat in the gt6, i run some pretty temp grease.
> 
> 
> Sent from my iPhone
> 
>>> On Jan 17, 2022, at 2:32 PM, Don Couch via Fot <fot at autox.team.net> wrote:
>>> 
>> Scott,
>> You can order the GT6 alloy hubs and uprated stub axles with sealed bearings from Rimmer Bros. or Canley Classics.
>> SpitBits probably has them and I’d imagine Ted S can get you a set.
>> The bearings are larger in the GT6 hub vs. the Spitfire.
>> Don
>> 
>> 
>> DON COUCH PHOTOGRAPHY
>> www.dcphotos.com
>> (512)-680-3540
>> 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/sjanzen@me.com
>> 
>> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220117/9fe7fd62/attachment.htm>