[Fot] maxpeeding rods

[Jim Gray]

I’ve used mine since 2010, no issues. I did see one batch used in another motor I built that were a little out of round on the big end.

So, like Phil said, it’s best to have them checked for round and the small end checked for wrist pin clearance.

Jim g

 

From: Fot <fot-bounces at autox.team.net> On Behalf Of Philip Gott via Fot
Sent: Friday, August 19, 2022 4:22 AM
To: Enquiries Road & Track <enquiries at roadandtrack.net.au>
Cc: FOT List <fot at autox.team.net>
Subject: Re: [Fot] maxpeeding rods

 

I asked the same question, more or less, about 2 years ago. The consensus at that time was that you should have a good machine shop check all dimensions and resize as needed.

Phil G

Sent from my iPhone





On Aug 18, 2022, at 11:05 PM, Enquiries Road & Track via Fot <fot at autox.team.net <mailto:fot at autox.team.net> > wrote:



ive used that brand on various other engines. no hassles

 

Terry


 

 

On Fri, Aug 19, 2022 at 8:38 AM Nick Black via Fot <fot at autox.team.net <mailto:fot at autox.team.net> > wrote:

fellow triumphers,

 

I'm in the process of building a "stockish" TR4 motor. The stock rods need to be rebuilt so I thot I'd use a set of Maxpeeding rods as they are not much more money than the cost to rebuild the stockers. Has anyone used a set of these in an 87mm sleeve? Will they fit down the bore or are they too wide to fit without going to a larger bore?

 

if its not one thing, its another...

Nick in NorCal

_______________________________________________
fot at autox.team.net <mailto:fot at autox.team.net> 

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot <http://www.team.net/pipermail/fotUnsubscribe/Manage> 
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/enquiries@roadandtrack.net.au



_______________________________________________
fot at autox.team.net <mailto:fot at autox.team.net> 

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220819/25d3abca/attachment.htm>