[Fot] TR4 front engine plate = wanted

[fubog1]

 It's rare nowadays to find one that doesn't need the weld&grind repair...I always make sure that the tensioner is spaced out a bit from the plate, & use good quality tensioners ie the plated ones that Greg Solow supplies (hopefully still does cuz I need a couple).

Glen Efinger
 
 
-----Original Message-----
From: Gregmogdoc--- via Fot <fot at autox.team.net>
To: vintagenick42 at yahoo.com; fot at autox.team.net
Sent: Sun, Aug 14, 2022 10:39 pm
Subject: Re: [Fot] TR4 front engine plate = wanted

Nick, we usually weld up the damaged area & then
either have a machinist mill the area down flat or
grind it flat and smooth with a die grinder and a
mounted stone.  We have had great success doing this.
almost every wet liner TR engine need this repair if
there are very many miles on the engine. 
                                Regards, 
                                  Greg Solow
                                  The Engine Room
                                  Santa Cruz.  



------- Original Message -------
From    : Nick Black via Fot[mailto:fot at autox.team.net]
Sent    : 8/14/2022 6:24:48 PM
To      : fot at autox.team.net
Cc      : 
Subject : RE: [Fot] TR4 front engine plate = wanted

 fellow triumphistiI've been playin with TR's most of
my life and as such have accumulated more than a
bunch-o-parts. But, wouldn't ya know, I don't have a
decent front engine plate in the bunch!So, I need a
front plate that isn't torn up and gouged by the
chain tensioner.Anyone have a good front engine plate
for a TR4 that they want to sell?Lemme no,Nick in NorCal

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/fubog1@aol.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20220815/ee78eab9/attachment.htm>