[Fot] piston ring makers

[R. John Lye]

I was about to suggest Total Seal as well, but Ralph beat me to it.

John
 



On Wed, 12 May 2021 22:44:09 +0000 (UTC), ralph hansen via Fot <fot at autox.team.net> wrote:
 

 

take a look at Total Seal Rings

 

 




On Wednesday, May 12, 2021, 05:41:35 PM CDT, Enquiries Road & Track via Fot <fot at autox.team.net> wrote:

 

 



folks, looking for suggestions as to where in USA or UK i can buy quality piston rings. i'm rebuilding a couple of pre-war triumph engines, so its not something your average parts shop can help with. 
 

ive tried race piston people like Weisco, but its too unusual for them.

 

I really need someone used to older engines, as the rings are very wide for the bore diameter. MG XPAG overbored engines are close, but narrower in the rings

 

FYI, it 65.5mm bore with rings being 1/8, 1/8 and 3/16 wide

 

any leads appreciated, thanks

 













Terry
















_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/quikrx@yahoo.com

 


_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rjl6n@cstone.net

 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210512/cee51e24/attachment-0003.htm>