[Fot] piston ring makers

[ralph hansen]

 take a look at Total Seal Rings

    On Wednesday, May 12, 2021, 05:41:35 PM CDT, Enquiries Road & Track via Fot <fot at autox.team.net> wrote:  
 
 folks, looking for suggestions as to where in USA or UK i can buy quality piston rings. i'm rebuilding a couple of pre-war triumph engines, so its not something your average parts shop can help with. 
ive tried race piston people like Weisco, but its too unusual for them.
I really need someone used to older engines, as the rings are very wide for the bore diameter. MG XPAG overbored engines are close, but narrower in the rings
FYI, it 65.5mm bore with rings being 1/8, 1/8 and 3/16 wide
any leads appreciated, thanks
Terry_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/quikrx@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210512/8d2d8409/attachment-0003.htm>